It is designed to dry, post expose and light-finish solvent-washable as well as water-washable, polyester-backed, analogue and digital plates up to a size of 132 x 203 cm (52x80 inch) and thickness up to 7 mm (0.276 inches).
The standard version is equipped with a stress-accumulation early-warning-system and may be equipped with optional tools that enable remote-monitoring and remote-diagnostics.
Combined 132x203cm (52x80") Unit
Vianord offers this solution to combine in a unique unit the dryer and light finisher sections. This unit is available for plates size up to 132 x 203 cm (52x80 inch).
Dryer
- 60 Celsius degree hot air (140 degree Fahrenheit)
- 6 drawers with individual timers
- 3 heating sections with separate temperature control and air circulation (2 drawers each)
- Uniform temperature for excellent drying result
- Safety thermostat in every section
- Exhaust system integrated
- Safety device for exhaust control
- Touch screen operator display
- Programmable unit warm up
- Automatic switch off after last plate
Light-Finisher
- UVA + UVC lamps for post exposure and light finishing
- Programmable operation: simultaneous/separate/sequential
- Separate timers for UVA and UVC
- Automatic plate cooling with programmable time
- 24 programmable channels for different plate types
- Powerfull air exhaust with delayed stop for safe zone extraction
- Fiber optic lamp failure detectors
- Exhaust system integrated
- Touch screen operator display
Encumbrance
CE Certification
The equipment is designed and manufactured according to the EEC safety and health standards, as specified in the Type Examination Certificate No. MA19-0042548-01 (309) issued by IMQ spa – Via Quintiliano 43 – 20138 Milan ITALY, and on the basis of the verifications carried out according to the essential requirements of the Directive 2006/42/EC, the system respects and is in compliance with all the applicable points.
General Features
This PLC controlled, dryer and light-finisher combined unit is specifically designed for high quality digital and conventional photopolymer plates for flexible printing applications (e.g. wide web).
Solvent
Dryer
- Drawers Pre-Heating management
- Temperature management system
- Separate Heat management (one each 2 drawers)
- Dedicated exhaust system
Light Finisher
- Flexible post exposure and light finishing sequence
- Static cooling system (air cooling)
Production Data Recording
Stress-Accumulation Early-Warning
Remote Diagnostics
System Dimensions (net)
245 x 180 x 131 cm
96.5 x 70.8 x 51.6 inch
System Weight (net)
Packing Dimensions
Industrial Wooden Crates are favoured if the system must withstand multiple transhipments during transport and is mandatory when shipped outside the continent. Dimensions: 278 x 195 x 193 cm (109 x 76.8 x 76.0”)
The dimensions mentioned above are for reference only; packaging dimensions may vary depending on the packing company hired for the job.
Packing Weight
The weights mentioned above are for reference only; packaging weight may vary depending on the packing company hired for the job.
Mains Electricity
Power Supply (field configurable)
360 / 440 Volt – 50 / 60 Hz - 3Ph / N / PE - 207 / 243 Volt – 50 / 60 Hz - 3Ph / PE
Current (nominal load)
15 A (360/440 Volt configuration) - 26 A (207/243 Volt configuration)
Power Rating (nominal)
9 Kw
Connecting Wires
5 x 4 mm2 (360/440 Volt configuration) - 4 x 6 mm2 (207/243 Volt configuration)
Grounding
Exhaust
The unit is equipped with a well-designed exhaust system that collect and conveys vapours and fumes from the different sections the machine and discharge them as quickly and silently as possible. The blower in the systems has sufficient power to vent the entire equipment when the tube supplied is connected directly to a vent hoods in the external wall or on the roof.
Light Finisher
Duct connection (V19): Ø 140 mm (5.5”) Airflow: 400-600 m3/h
Duct connection (V20): Ø 140 mm (5.5”) Airflow: 400-600 m3/h
Dryer
Duct connection: Ø 80 mm (3.15”) Airflow: 50-80 m3/h
Working Environment
The system should be installed in a clean, constant-temperature and constant-humidity pre-printing environment with a temperature between 18 and 26°C (64.4 and 78.8°F) and a non-condensing relative humidity in the range of 40 to 60%.
To maintain such environmental standards an efficient heating/cooling and ventilating system may be required.
System Colour
Vianord offers all equipment in standard powder coating Vianord Black.
In addition, Vianord offers numerous ways you can personalize your system. In fact, Vianord offers the best customization options in the industry! This allows you to showcase your brand and company’s spirit in ways other companies can’t offer. You can choose your personal colour and have your logo, company name, or slogan pop.
